Bell Forced Air QL 180 (V10) Helmet Adapter
- Bell Forced Air QL 180 (V10) helmet adapter - connects your air hose to the forced air inlet with a 23 mm quick lock mount. Check your helmet's inlet type.
Bell Forced Air QL 180 (V10) Helmet Adapter
The Bell Forced Air QL 180 (V10) Helmet Adapter is a helmet accessory that links the forced air inlet on your helmet to the hose that supplies the air. It is designed for Bell helmets. The adapter mounts directly onto the forced air inlet, giving your helmet a connection point for the air hose.
The adapter works as a reducer: it lets you connect a V10 nozzle (23 mm) to a V05 hose (31 mm). The 180 designation means the straight version - Bell also offers a 90° angled version.
Bell offers adapters and nozzles from the Forced Air family in several angled versions, each suited to a different setup. The QL 180 version uses the V10 mount, a 23 mm quick lock connector.
A closer look at the adapter
The adapter has a compact, axial two-part body. The lower section is a wider cylinder with smooth walls and a rounded edge. Above it, a gentle step leads into a narrower section that tapers slightly towards the top and ends in a round through-opening. The whole piece is black with a matt finish and no prints or logos, so it blends in neatly with your helmet hardware and the hose.
Construction details
- Mount: V10 quick lock 23 mm system - a quick-release connector instead of a push-fit connection.
- Function: connection point for the hose that feeds air to the forced air inlet on your helmet.
- Version: QL 180, one of several angled versions in the Bell Forced Air range.
- Contents: adapter kit.
- Compatibility: forced air inlets on Bell helmets with a V10 type mount.
Ideal for drivers running forced air in a Bell helmet
This adapter is the right choice if you connect an air hose to your helmet and want to fit it onto a forced air inlet with a V10 quick lock connector. Important: Bell uses two mount types - V05 (push-fit, 31 mm) and V10 (quick lock, 23 mm). Before you order, check which one the forced air inlet on your helmet uses, as this adapter fits the V10 version only.
Why choose the Bell Forced Air QL 180 (V10) adapter?
- Quick fitting: the quick lock mount lets you connect the adapter to the inlet and disconnect it with ease.
- Made for Bell helmets: designed by Bell for the forced air inlets on its own helmets.
- Clear marking: the QL 180 (V10) code identifies the version and mount type at a glance.
- Discreet look: matt black with no prints, it sits neatly alongside your helmet hardware.
- Part of a system: the adapter belongs to the Forced Air accessory family, available in several angled versions.










