Bell Maglock Air Helmet Adapter
- Bell Maglock Air Helmet Adapter - magnetic forced air connector on the helmet side. Quick one-handed release for driver changes and emergency extraction.
Bell Maglock Air Helmet Adapter
The Bell Maglock Air Helmet Adapter is a helmet accessory from the MAGLOCK AIR system that mounts on the helmet side. It links your helmet to a forced air system and creates an airtight seal with the Maglock hose. The hose stays attached to your helmet thanks to a machined magnet, which the manufacturer describes as a rare earth magnet.
The kit includes only the helmet-side part. It comes with a plug that keeps dirt out of the inlet when the hose is disconnected. The air hose and the inlet (duct) in the helmet are not included. To complete the system, you need the MLA1003 hose connector or the full MLA1000 kit. The manufacturer code for this part is MLA1001.
Adapter Design in Detail
The adapter has a short, cylindrical body with a matte black finish that flares slightly towards the outlet. A light grey ring closes the edge on the hose side and stands out clearly against the black housing. On the side you will find a white MAGLOCK logo with a graphic cross made of double lines. A small tab with a hole sits on the upper part of the body. Once fitted, the adapter sits against the air inlet in the lower side area of the helmet shell, and the hose connects to it from the front.
Performance Features
- Magnet: the connection is held by a machined magnet with a holding force of 30 lbs, according to the manufacturer, Bell.
- Airtight seal: the connector forms an airtight seal with the Maglock hose, so no air is lost on the way to your helmet.
- Quick release: the hose disconnects with one hand, using a light, angled pull - just like a quick-release coupling.
- Material: the nylon-reinforced ABS housing is lightweight and puts no extra strain on the driver's neck.
- Fire resistance: the system's connectors are fire resistant, which matters inside the cockpit of a racing car.
- Plug: once the hose is disconnected, the plug protects the helmet inlet from dust and dirt.
Ideal for Drivers Using Forced Air
This adapter is an extra kit for drivers who race in more than one helmet and want each of them ready to plug into the same hose. It is also a smart choice for teams with several drivers, where pace matters during a driver change - the next driver gets into the cockpit and connects the air supply to their own helmet straight away. The design makes it easier to exit the vehicle quickly, and according to the distributor, the connection also releases during an emergency driver extraction (hot extraction). The distributor states that the system has been tested in open-wheel racing, closed-wheel racing and off-road racing.
Why Choose Bell Maglock Air?
- Fast handling: the hose connects and disconnects without tools, saving time at every stop and driver change.
- Safety: the magnetic connector releases with a firm movement, so it does not block your exit from the vehicle.
- Flexibility: several Bell adapters let you use a single hose with multiple helmets.
- Origin: according to the distributor, the system is made in the USA.
- Warranty: one year from the date of purchase - MAGLOCK will repair or replace the product at its discretion.










